Find the Parts you need for Aerodry and Worldwide Drying Systems.
We supply replacement options for discontinued bag drying systems.
Stainless Steel Junction Box
- Non-corrosive 304 Stainless Steel
- 4 inch wide x 6 inch tall x 5 inch deep
- 1 inch NPT 304 SS connection
- Custom Hoffman brand build
- NEMA 13, IP 66
- UL Listed, CSA Certified, IEC, cUL
- Only NEW, tested components, proven suitable for harsh wash conditions, are installed in Aerodry systems and provided as replacements
- To order, contact [email protected]
Carwash Dryer Side Nozzles
- Soft, non-marking Silicone
- 6″ ID reducing to 4″ ID at exit
- 20″ overall length
- Includes worm gear clamp
- Colors: Red, blue, or black
- Only NEW, tested components, proven suitable for harsh wash conditions, are installed in Aerodry systems and provided as replacements.
- To order, contact [email protected]
Carwash Blower Top Nozzles
- Soft, non-marking Silicone
- 12″ ID reducing to 10″ ID at exit
- 18″ overall length
- Includes worm gear clamps
- Colors: Red, blue, or black
- Only NEW, tested components, proven suitable for harsh wash conditions, are installed in Aerodry systems and provided as replacements.
- To order, contact [email protected]
Car Wash Dryer Motors
- ABB/Baldor, 15 HP, 3 phase, 60 Hz
- Baldor Specification #07K090R841G2
- ABB 575v (11 KW) Available
- 3600 RPM, 254TZ frame, 1.15 SF
- Stock 230-460v, useable @ 208v or 575v
- TEAO (totally enclosed, air over), no grease zerks!
- Cast body dissipates heat
- Oversize bearings increase motor life
- Factory extended leads reach exterior J-Box
* New bushing may be required to secure fan to shaft of replacement motor.
*Guaranteed operable on variable frequency drives (VFDs or VSDs).
*Other voltage/Hz combinations available.
*Only NEW, tested components, proven suitable for harsh wash conditions, are installed in Aerodry systems and provided as replacements.
To order, contact [email protected]
Taperloc Bushing
- Secures fan to motor shaft
- For 1-5/8″ motor shaft
- Screw size M8
- Hex key size 6mm
- Tightening torque 30 ft-lbs
- Only NEW, tested components, proven suitable for harsh wash conditions, are installed in Aerodry systems and provided as replacements.
- To order, contact [email protected]
Carwash Air Producer
- Motor/fan assembly in stainless housing
- Powered by 15 HP motor
- Complete, ready for install
- Replaces Aerodry™ Systems and Worldwide Drying Systems
- Only NEW, tested components, proven suitable for harsh wash conditions, are installed in Aerodry systems and provided as replacements.
- To order, contact [email protected]
Variable Frequency Drive Panels
- (various HP/Voltage configurations)
- Panels include cooling fans with thermostat; exterior hand-off-auto switches for each motor; interface relays (120v and 24v included); individually lockable protection for each drive; main lug power distribution block; stagger-start PLC with timers; thru-door disconnect.
- Pre-programmed high Hz (operator adjustable).
- Separate 120v circuit required for cooling function. Enclosure is NEMA 1 painted steel, UL Listed.
- Fiberglass Enclosures are optional add-on.
- To order, contact [email protected]
Across-the-Line Starter Panels
- (various HP/Voltage configurations)
- Panels include exterior hand-off auto switches for each motor; interface relays (120v and 24v included); individually lockable breaker protection for each motor; main lug power distribution block; stagger-start PLC with times; thru-door disconnect.
- Enclosure is NEMA1 painted steel, UL Listed.
- Fiberglass Enclosures are optional add-on.
- To order, contact [email protected]